Duct Machinery -Saudi Dutest

Galvanized Iron (GI) Ducts
Pre-insulated (PI) Ducts

GI Ducts

Galvanized Iron (GI) Ducts are manufactured at our State-of-the-art factory as per customer requirements. All the accessories such as fittings, attachments, components, and other goods are manufactured from the finest grade of material and cutting edge technology. Our quality controllers check each and every detail on well-defined quality parameters. Competitively priced, if need to be, the offered range of ducting is also facilitated with sound proofing and high degree insulation.
Features:

Hot-dipped galvanized steel sheets of lock-forming quality are used for the manufacturing of standard ducts
Ducts are also available in both, stainless steel and Aluminum
In order to re-inforce, all straight ducts have beading all along at a distance of 300 mm between them.

Our clients will also have the choice of Pre-insulated ducts. This is a more recent technology and is becoming popular in the HVAC industry as it is installed in a single fix. This eliminates the need for a second fix, which saves significant time and cost. It is made of rigid close cell Polyisocyanurate board and phenolic insulated panels faced by an aluminum foil on both the sides.
Features:

Lower heat conductivity, higher thermal efficiency
Low density, light weight
Foamed with CFC free materials, environment-protective
Hermetic seal ensures little air leakage
Aluminum foil reinforced on both sides
Corrosion protective
Hygienic
Foamed with closed-cell structure (water-proof and sound-insulated)
Rapid installation and convenient maintenance (cost-saving)
No protruding flange on the connections (save plenty of building space).

Plasma Cutting Machine

CNC Plasma Cutting Machine, It’s a high speed plasma cutting machine for quality metal processing features a new Spiro PC based control system. The machine comes with a large color touchscreen and of course the state of the art CAM – DUCT software, generates 3 Dimensional fittings into nested layouts with minimum wastages.

Auto Duct Former

It meets the needs of duct industry with its versatility in coil selection whether size or gauge or width or combination of two. Its comprehensive flattening station ensures the level sheets for duct forming on the machine, but also plain sheets for the production of fittings off line for plasma cutting.

Nuloc Auto Seam

The Nuloc Auto Seaming Machine does the longitudinal Seam from two raw edges to the finished seam. The preformed duct is laid into the “V” shaped guides with the open corner downwards, the leading end of the duct is clamped together to prevent any twist being formed, and is released from the clamp after the seam is completed.

Pittsburgh Unit

It rolls the female pocket on the back end of one blank and the male 90 degree edge on the leading edge of the next blank – in one single pass.

CGF1 Flange System

Continuous Girth Flange with rotary metal stitching, One side of the machine is capable of forming the 20mm CGF1 profile down one side of the machine and the 35mm CGF1 profile down the other, in a continuous process from hand fed blanks. The forming is achieved by means of a series of pairs of hardened steel forming rollers, the final forming stations of the 20 & 35mm CGF1 profiles perform a rivet less stitch operation to positively secure the free end of the flange.

Folding Machine

Special Folding Machine for Integral Flanged Duct and Plain Duct. It is a Stand Alone Hydraulic Folder machine, is a free standing 2 meter wide, and hydraulically powered which can accommodate both mild and galvanized sheet.